Wilma Hancock
Main menu

Tuesday, January 25, 2022

[itdxb] 30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD

[itdxb] 30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD
January 25, 2022 0 Comments
30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Description:
The Holybro FETtec FC G4 features the latest STM32 G4 MCU with math accelerator for the ultimate in-flight performance, onboard OSD for KISS flight tuning, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs for support of up to 8 motors, and dual 20×20 and 30×30 mounting holes.

Note:
Currently, the Holybro Fettec FC G4 does not support BLHeli_32 ESC Configuration via FC Passthrough and BLHeli_32 ESC telemetry/current reading. An Betaflight Flight Controller is needed to configure BLHeli32 ESC Setting.

Specification
Latest STM32G4 Processor
     170Mhz + Math accelerator
     MPU6000
Supply voltage 6-27V (2S-6S Lipo)
2x dedicated onboard BEC (max. 600mA each)
     5V BEC for RX
     5V/16V BEC for VTX (switchable and real Pit*)
2x 8 pin connector for solder free ESC connection
     Connector 1: ESC signal 1-4, telemetry, VCC, GND
     Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
     real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
2x 6 pin connectors for serials
     RX1, TX1, 3.3V, VCC, 5V, GND
     RX3, VCS/TX3, RGB LED, VCC, 5V, GND
1x 4 pin connector for receiver
     Signal, TLM, 5V, GND
5 UART serials
     UART 1 free
     UART 2 used for Receiver
     UART 3 free
     UART 4 used for onboard OSD, can be set free
     UART 5 used for ESCs / TLM / Onewire
4 ESC solder pads (Signal/GND) in each corner
Buzzer pads
4 tiny RGB LEDs (selectable color)
Supported ESC protocols
     PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
FETtec KISS firmware
Onboard OSD
     Graphic OSD (STM32)
     Full KISS Tuning
     Filter (PIDs, Rates, Settings)
     LED control (RGB LED, Racewire)
     VTX
     Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
     KISS GPS support + live map
     Custom graphic pilot logo
     Stick overlay
     Custom layout
     can be deactivated for usage of digital systems

65A ESC
Continuous Current: 65A x4
Burst Current: 75A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 168
Dimensions: 43 x 44mm / Weight: 15.8g
Mounting holes: M4 30.5×30.5mm (M3 grommets included)

Features:
New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM output up to 96K (default 48K)
Metal-cased MOSFET for excellent heat dissipation
Massive on-board capacitance for noise filtering at 2068uf
3 oz copper PCB design to allow bigger current and better heat dissipation
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Manual:


Package included:
1x FETTEC FC G4 STACK
1x Electrolytic capacitor: 1000uF 35v
1x JST SH1.0 8pin to 8pin 25mm cable
1x JST SH1.0 8pin to 8pin 65mm cable
1x JST SH1.0 8pin 100mm cable
1x JST SH1.0 6pin 100mm cab



30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD
30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD



30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone COD
Read more »
Reading Time:
By at

Monday, January 24, 2022

[jswpg] Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter COD

[jswpg] Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter COD
January 24, 2022 0 Comments
Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter COD
Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter CODPropeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter CODPropeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter COD


Buy Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter COD


Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter


Description:

Item Name: Props Guard

Material: ABS

Color: Grey

Size: 95x29mm

Net Weight: 33g

Usage: for Hubsan Zino MINI SE / PRO RC Drone Quadcopter


Features:

- Isolation of blades to ensure flight safety.

- Lightweight and compact, easy to assemble and disassemble.

- Design for Hubsan Zino MINI SE / PRO RC Drone.


Note:

NOT Included the Drones.


Package Included:

2 x Props Guard





Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter CODBuy Now
Read more »
Reading Time:
By at

Sunday, January 23, 2022

[mmtzk] URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD

[mmtzk] URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD
January 23, 2022 0 Comments
URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone

Description:

Brand: URUAV
Name: 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery
Capacity: 3200mAh
Weight: Approx 156.2g
Size: 70*36*36mm
Plug: XT60
Color: As Shown
Note: Due to the difference between the measurement, the battery dimension and weight may have little error.
 
Caution:

Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
 
Package Included:

1x URUAV 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery



URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD
URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD



URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone COD
Read more »
Reading Time:
By at

Tuesday, January 18, 2022

[gopsa] 4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD

[gopsa] 4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD
January 18, 2022 0 Comments
4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Description:

Brand: Gemfan

Item Name: 75mm 2-Blades Propellers

Blades: 2

Material：PC

Quantity: 4 CW & 4 CCW

Pitch: 0.9in

Color: Transparent Blue/ Transparent Gray ( Optional)

Prop Disk Diameter: 75mm

Center Thickness: 5mm

Center Hole Inner diameter: 1.5mm

Max Prop width: 10.5mm

Weight: 0.48g

Application: Original Propeller for Happymodel CRUX3 1S ELRS FPV Racing Drone.


Package Included:

4x 75mm 2-Blades Propellers CW

4x 75mm 2-Blades Propellers CCW




4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD
4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD



4 Pairs Gemfan 75mm 2-Blades 1.5mm Hole PC Propeller for CRUX3 1S ELRS RC Drone FPV Racing COD
Read more »
Reading Time:
By at

Friday, January 14, 2022

[cakpg] PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD

[cakpg] PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD
January 14, 2022 0 Comments
PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Description:

Brand: PGYTECH

Item Name: DJI Action 2 Filters

Model: P-28A-010, P-28A-011, P-28A-012, P-28A-013

Material: Aluminium, optical glass

Net Weight

UV: 3.3g 

CPL: 5g

ND-PL（NDPL 8 16 32 64) : 5g*4 

ND SET（ND8 16 32 64）: 3.3g*4

Size

UV: 38.3mm*38.3mm*2.2mm 

CPL: 38.3mm*38.3mm*2.7mm

ND(8 16 32 64): 38.3mm*38.3mm*2.2mm

ND-PL(8 16 32 64): 38.3mm*38.3mm*2.7mm

Compatibility: DJI Action 2


Package Included:

1x DJI Action 2 Filters




PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD
PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD



PGYTECH UV CPL NDPL ND Camera Lens Filter Combo for DJI Action2 Sport Camera RC Racing Drone COD
Read more »
Reading Time:
By at

Thursday, January 13, 2022

[skcrt] Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD

[skcrt] Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD
January 13, 2022 0 Comments
Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Description:
Item Brand:Wltoys
Item Number:21647

Item Name:2.4G transmitter
Channel:2CH
Remote Control Distance:＞100m
Required Battery:4X 1.5V AA battery(not included)
Product Weight:About 274.4g
Fit for:Wltoys K989 1/12 2.4G 2WD Rc Car 

Package included:
1X Transmitter





Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD
Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD



Wltoys K989 1/28 RC Car Spare 297L Protocol Transmitter Remote Control 21647 Vehicles Model Parts COD
Read more »
Reading Time:
By at

@way2themes