Wilma Hancock
Main menu

Monday, May 10, 2021

Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD - (tppga)

Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD - (tppga)
May 10, 2021 0 Comments
Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Introduction:

RTF version is equipped with 2-4s balanced charger,maximum 1.5A chargingcurrent,automatic detection of voltage adaptation current,maximum 25W power,support DC9-16v input.And it can be used as battery voltage detector when not charging,which is very convenient


Description:

Item Name:Smooth-R Drone

Version:RTF

Wheelbase: 100mm

Weight: 90g(without battery)

             118g(with battery)

FC&ESCI: F405 BLS 20A AIO

Motor: 1204-5200kv

Blade: HQProp T2x2x4

VTX: 25-100-200mw 48CH VTX

Camera: Caddx ANT 1200TVL FPV camera

Power plug: XT30 plug

Battery: 450mah 3s 80c lipo included(Fly about 4min)

          (support 3-4s 450-550mah battery)

Size: 137*137*30mm


Jumper T-LITE 2.4Ghz Radio Control
STM32F205 MCU
OpenTX firmware
Screen: 1.3”12864
High quality hall sensor gimbals
Internal Multi-protocol module
Improved R9M-LITE module slot,full speed TBS NANO Crossfire supported
Built in USB-C charging
Voice and Vibration function
Voltage: DC3.5-4.2V
Battery: 1*18650(Battery not included)
Channel: 16ch
External Micro SD Card: reserved SD card slot
Size:166*106*56mm
Weight: 260g(with 18650)
3.5 Inch FPV 5.8Ghz Receiver Screen

5.8Ghz 48CH , including Race Brand   

Bulit-in battery, working time 2.5 hours   

Compact and portable, 350 lumen , 960x240p definition

Camera

Model:Caddx Ant

Image Sensor: 1/3 CMOS Sensor

Horizontal Resolution: 1200TVL

TV System: NTSC or PAL

MENU: Support

Image: 16:9 or 4:3

Synchronization: Internal 

Electronic Shutter: PAL: 1/50~100,000；NTSC: 1/60~100,000

S/N Ratio: ＞52dB(AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min.illumination: 0.001Lux@F1.2

F405 AIO FC
CPU: STM32F405RGT6
MPU: MPU6000(SPI)
Firmware: Betaflight BETAFLIGHTF4.HEX(4.2.0)
Built-in Betaflight OSD(AT7456E)
BEC Output(two): 9V/2A,5V2.5A
USART: UART1,UART2,UART3,UART6
Receiver: SBUS,IBUS,DSM2,DSMX,TBS(UART6)
Blackbo: 8MB
Built-in Current Sensor
Input Voltage: 2-6S Lipo
ESC Current:20A
Firmware: BLHELI-S G-H-30.HEX



Package Included:

1 x Smooth-R FPV Racing Drone

2 x 450mah 3S 80C Battery

1 x Battery Strap

1 x Intructions

1 x Backup Screw Pack

1 x Jumper T-LITE 2.4Ghz Remote Control

1 x 3.5 Inch FPV 5.8Ghz Receiver Screen

1 x Balance Charger

1 x 12V/2A Power




Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD
Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD



Smooth-R 100mm 2 Inch 3-4S FPV Racing Drone RTF Jumper T-LITE Radio Control 3.5 Inch 5.8GHz Receiver Screen 1204 Motor Caddx ANT 1200TVL Camera COD
Read more »
Reading Time:
By at

Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD - (vfbdt)

Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD - (vfbdt)
May 10, 2021 0 Comments
Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Features:

Sunnylife 2-in-1 battery protection cover & booster stand, suitable for DJI FPV Drone

Effectively increase the height by about 10mm, preventing damage to the rugged ground or soiling the battery and the down-view sensor

Soft rubber protective cover, effectively protect the battery, anti-knock, anti-scratch and waterproof


Description:

Item Name: Sunnylife 2-in-1 Battery Protective Cover

Applicable models: applicable to DJI FPV Drone

Material: Soft rubber

Net weight: 23g

Packing size: 88*70*55mm

Color: Black


Package Included:

1x  Battery Protective Cover




Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD
Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD



Sunnylife Battery Protection Cover Landing Gear for DJI FPV RC Drone 85*68*53mm Soft Rubber Safe Fly COD
Read more »
Reading Time:
By at

Sunday, May 9, 2021

iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD - (cfooo)

iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD - (cfooo)
May 09, 2021 0 Comments
iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Introduction:

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8）


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Description:

Brand: iFlight

Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 with LED Light FPV Motor ( 4S 2750KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 399g (without battery)


Features:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING 2207 motors with LED Light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD （AT7456E）

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1、UART2、UART4、UART5)

- UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mm，φ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

- Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW

- Output 48 frequency points, 

- PIT/25mW/200mW/400mW/800mW

- The output power is stable;

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V～36V，+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


Additional Suggested Parts (Not Included):

Battery: 4S 1550mAh

Camera Mount for Gopro


Package Included:

1 x XL5 V5 Frame

1 x Caddx Ratel, 2.1mm lens camera

1 x Albatross RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Note: Camera Mount for Gopro is not included.



PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"




iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD
iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD



iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV COD
Read more »
Reading Time:
By at

iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD - (dcwpz)

iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD - (dcwpz)
May 09, 2021 0 Comments
iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD

Download Now
Server 1Download Now
Server 2Download Now
Server 3

Introduction:

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8）


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Description:

Brand: iFlight

Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 with LED Light FPV Motor ( 6S 1300KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 399g (without battery)


Features:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING 2207 motors with LED Light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD （AT7456E）

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1、UART2、UART4、UART5)

- UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mm，φ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

- Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW

- Output 48 frequency points, 

- PIT/25mW/200mW/400mW/800mW

- The output power is stable;

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V～36V，+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


Additional Suggested Parts (Not Included):

Battery: 6S 1300mAh

Camera Mount for Gopro


Package Included:

1 x XL5 V5 Frame

1 x Caddx Ratel, 2.1mm lens camera

1 x Albatross RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Note: Camera Mount for Gopro is not included.



PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"




iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD
iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD



iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD
Read more »
Reading Time:
By at

@way2themes