iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD - (uvnwt) - Wilma Hancock

Saturday, May 8, 2021

iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD - (uvnwt)

iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
COD

Download Now
Server 1
Download Now
Server 2
Download Now
Server 3


Introduction:

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8)


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Description:

Brand: iFlight

Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 with LED Light FPV Motor ( 6S 1300KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 399g (without battery)


Features:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

- XING 2207 motors with LED Light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD AT7456E

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1UART2UART4UART5)

- UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mmφ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW

- Output 48 frequency points, 

- PIT/25mW/200mW/400mW/800mW

- The output power is stable;

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V~36V,+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


Additional Suggested Parts (Not Included):

Battery: 6S 1300mAh

Camera Mount for Gopro


Package Included:

1 x XL5 V5 Frame

1 x Caddx Ratel, 2.1mm lens camera

1 x Albatross RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Note: Camera Mount for Gopro is not included.



PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"




iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
COD
iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD



iFlight Nazgul5 V2 5 Inch 6S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV COD


@way2themes